home *** CD-ROM | disk | FTP | other *** search
- Path: rover.ucs.ualberta.ca!ravana!Kevin.Dorma@ualberta.ca
- From: Kevin.Dorma@ualberta.ca@ravana.srv.ualberta.ca (Kevin Dorma)
- Newsgroups: comp.dcom.modems
- Subject: Kermit with Cardinal 144i?
- Date: 7 Jan 1996 01:08:33 GMT
- Organization: Dept. of Chemical Engineering, University of Alberta
- Message-ID: <4cn6eh$1f3a@pulp.ucs.ualberta.ca>
- NNTP-Posting-Host: ravana.eche.ualberta.ca
- X-Newsreader: TIN [version 1.2 PL2]
-
- Kermites!
-
- I am upgrading from Kermit 3.10 to 3.14. 3.14 is not recognizing
- my modem:[
-
- Modem: Cardinal MVP 144DSP-C (firmware upgrade to 196)
- Port : com3 (Set Port bios3)
- Init : at&f
-
- I tried the Digicom 144p setup, heard digicom developed the Cardinal
- firmware. Failure:(
- By the way my initialization must be wrong for 3.10. 2400 baud
- connections are clean, but at real speeds the modem ats like a ma1nual
- line buffer.
- Read the manual you say?
- Been there
- Done that
- Got nowhere.
-
- ragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanragman
- RAG
- You speak not to a mouth-piece !
- of THE SUITS, but a Man, ! Don't rag on Me man
- Fearless in a croud, ! I'm just another corpse
- Vocal in anonymity, ! looking for a nice, dark, hole.
- Responsible for nothing. !
- MAN
- manragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanragmanrag
-
-
-